Results 1 to 4 of 4
  1. #1
    I'm Unoriginal
    I Steal Other People's Work
    I Hijack Other People's Accounts

    Join Date
    Jun 2012
    Posts
    509
    Points
    877
         User Info     Contact     Gamer ID
    Join Date
    Jun 2012
    Posts
    509
    Points
    877
    Gamer IDs

    Gamertag: Deranged Modz Steam ID: None

    Default How to add custom LED lights to your Xbox

    First take apart your xbox

    Tools need to take apart xbox 360


    Tools Needed:
    Very small flathead screwdriver or a flat point such as a kitchen knife or pushpin
    Small Phillips head screwdriver
    A torx style star head screwdriver size T10


    how to open an xbox 360

    Step 1. Disconnect ALL wires from xbox, once everything is disconnected hold power button in for 2 seconds to clear any electric charge left in the console

    Step 2. Remove Hard Drive and any memory unit/cards you might have plugged into the console. You will remove the hard drive by pressing button on the hard drive and pulling
    straight up.

    Step 3. Remove the faceplate by gripping the top and bottom near the left side of the console(the side that the disc drive is on) and pulling firmly but slowly until it pops off, then repeat this on the other end.

    Step 4. Remove top and bottom gray mesh panels by prying them off with any small objects by inserting them into holes on the sides of the xbox console at the left, middle, and right points where you can see the grey tabs and pushing in to release the catches.

    Step 5. Separate top and bottom of white case by inserting flat head screwdriver or knife blade into the back of the console at the points shown in the picture. You should hear a pop when each one releases; go down the line starting from left to right. You should hold the side that you're starting on and start to separate the case pieces so that they don't click back together when you pop the tabs



    Step 6. Complete seperation of the case by using a fingernail to unhook the tabs on the front of the console starting on one end and working your way to the other side, there should be 4 tabs to release, after that's done the top of the case should just slide right off.

    Step 7. Using your Torx T10 star screwdriver remove the 6 screws shown in the following picture, you don't need to remove any other screws even though there's a bunch on there



    Step 8. After all 6 screws are removed and SET ASIDE SO YOU DON'T LOSE THEM, flip the console over so that the remaining half of the white case is on top. Make sure that the metal part that you just unscrewed the screws from is facing down, on the table or ground, etc.

    Step 9. Pull the white case straight up, it should seperate easily from the rest of the console, and set it aside.
    From here you should see the "guts" of the console, you have the disc drive, cooling fan, motherboard, and a white guard to direct air flow in the console.

    Step 10- remove the white guard to direct air flow.


    than add your LEDs

    0 Not allowed! Not allowed!

  2. #2
    Just say no to drugs hell nah I ain't listen Drugs's Avatar

    Badge

    Join Date
    Jun 2011
    Location
    /r/Pokmon
    Posts
    3,565
    Points
    2,721
         User Info     Contact     Gamer ID
    Join Date
    Jun 2011
    Location
    /r/Pokmon
    Posts
    3,565
    Points
    2,721
    Gamer IDs

    Gamertag: Spin Master PSN ID: xTiPToN_- Steam ID: xTipton

    Contact info:

    Youtube Channel: http://www.youtube.com/users/xTiPToN

    Default

    Hey, don't advertise your shitty .forumotion. Thanks.

    0 Not allowed! Not allowed!
    Not a drug addict.

    | Wiki | Site Problems | Soundcloud | MTV Artist Page |

    PM @Tony for free Netflix Accounts

  3. #3
    Bad Company
    RED 58's Avatar

    Badge

    Join Date
    Jan 2012
    Location
    Goober's Coder CP
    Posts
    6,918
    Points
    9,658
         User Info     Contact     Gamer ID
    Join Date
    Jan 2012
    Location
    Goober's Coder CP
    Posts
    6,918
    Points
    9,658

    Default

    Quote Originally Posted by SHiiFT View Post
    Hey, don't advertise your shitty .forumotion. Thanks.
    its in his sig shiift

    0 Not allowed! Not allowed!



    Quote Originally Posted by Iced View Post
    Red 58 = Swoot (Reincarnated)
    Quote Originally Posted by GOOBER View Post
    Terr0r you need a Gecko. Lets go to the Pet store and buy one
    Quote Originally Posted by ABlackGuy View Post
    He may not have a soul but he still has a brain. Unlike Russ who has neither.

  4. #4

    Retired Prophet
    ToxicJew.'s Avatar
    Join Date
    Mar 2011
    Location
    S̢͎̳̞̲͈̪̳̻ͮͩt̟̳̏ͬ̔&#
    Posts
    7,809
    Points
    7,616
         User Info     Contact     Gamer ID
    Join Date
    Mar 2011
    Location
    S̢͎̳̞̲͈̪̳̻ͮͩt̟̳̏ͬ̔&#
    Posts
    7,809
    Points
    7,616

    Contact info:

    Youtube Channel: http://www.youtube.com/kennethbgoodin

    Default

    Cool tutorial dude.

    Quote Originally Posted by SHiiFT View Post
    Hey, don't advertise your shitty .forumotion. Thanks.
    Good job, moderator SHiiFT. One link is allowed in signatures though.

    0 Not allowed! Not allowed!
    ส็็็็็็็็็็็็็็็็็็็็็็็็็༼ ຈل͜ຈ༽ส้้้้้้้้้้้้้้้้้้้้้้้ส็็็็็็็็็็็็็็็็็็็็ ็็็็็༼ ຈل͜ຈ༽ส้้้้้้้้้้้้้้้้้้้้้้้

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT -10. The time now is 05:58 AM.
Powered by vBulletin®
Copyright © 2017 vBulletin Solutions, Inc. All rights reserved.