Results 1 to 2 of 2
Thread: Reflow tutorial|JTAG Only
07-02-2012, 10:33 AM #1
I Steal Other People's Work
I Hijack Other People's Accounts
- Join Date
- Jun 2012
Reflow tutorial|JTAG Only
Today I am going to be showing you how to reflow a xbox the right way instead a heat gun and towel trick.
2 videos are removed due to the vid limit : /.
Some info before we start-
Lets get started!
You will need some supplies to start off.
Step 1- Take apart your xbox 360 -
Step 2- Find the error code of your xbox 360.
Here is a video on how to find a secondary error code-
Once you find the number search it in google
Light to Numbers-
When you add them you get something like 0102 or what your numbers are.
Then Google the error code.
I usually use xbox experts. They are a really good site to find the codes out-Click Here
Once you find your error find the chip that is malfunctioning you can move onto the next step.
Step 3- Removing old thermal paste
Step 4- Applying flux to the chip
Step5- Preheating the board-
Step 6- Starting reflow- Skip the slow parts. Temp. Profile-
BEFORE STARTING THESE TEMPS ARE IN CELCIUS!
Turn on Preheater till it shows 145-150
Turn on top till coupler shows 160-170
Go on till Coupler shows 191
Go on till it shows 210
Go on till it shows 230
Turn down top till under 200 on coupler
Once couple is under 200 turn off top heater and preheater.
Step 7- Test your working xbox 360-
07-02-2012, 11:32 AM #2
Living Liek Larry
- Join Date
- May 2011
- Listen, strange women lyin' in ponds distributin' swords is no basis for a system of government.
copy and paste much?
but this wont work on all consoles some rrods cant be fixed, i myself have properly reflowed 3 xboxes so far and only 2 have worked after doing that and the xclamp fix.