Results 1 to 1 of 1
Thread: J-runner support thread.
06-26-2014, 05:03 PM #1
J-runner support thread.
What is J-Runner?
J-Runner is the ultimate JTAG/RGH Application.
This application includes XeBuild to read/write Nands images.
CPU Key functions – Get key over http and integrated cpu key database DashLaunch ini Creator Automated file save feature – saves files from each console to a folder based on console serial Automatic Remapping of bad blocks before creating ECC image (first 50 blocks) Xecuter J-R programmer full support Xecuter DemoN full support Xecuter DGX full support Xecuter Sonus 360 Editor Xecuter CR3 Pro Rater Integrated image building functions with no reliance on python Read, write and compare nand images independent of nandpro Automated update notification – always have the latest version, when available (requires Internet connection) Patch nand (change DVD Key, Drive OSIG and region) Manually alter Lock Down Values (LDV – for Xebuild use) added support for xebuild 1.03 added support for dashlaunch 3.02 Added Team Xecuter DemoN support Improvements to POST monitor Improved nand initialization and ECC creation (faster) Added POST Monitor Added Scan for keys/nands function in Key database SMC config viewer Extract files function now extracts all the required files for Fusion into output Version 3 Build 4 Added an option to prepare an hdd for use with an XBox One. It's beta so use it at your own risk. We used x360usb v1 on our tests. Fixed hex editor popping up when exctracting files Version 3 Build 3 Bug Fixes Dynamic size when reading full dumps of "Corona 4GB", should work with XBOX One Version 3 Build 2 JR-P menu with power on, shutdown and bootloader mode commands Warning: when in bootloader mode, JR-P needs to get reflashed to go into normal mode again Bug Fixes Version 3 Build 1 Support for new dashlaunch/xeBuild Latest XeLL Support for 16537 dash XVal, why? no reason XVal related function but for secdata.bin Get Latest System Update function (hope MS won't bother JR downloading it) xsvf LPT support for XP users (for those cheap asses who didn't buy a JR-P) ECC files updated with new XeLL both minor and major bugfixes and bug creations (As always please report bugs to make JR better ) Build 290 Changed way it handles ECC on 14719< nands Instead of Write ECC* there is now Create ECC* (blame Martin_C) It has been altered due to a large number of users who didn't understand the process, and to bring it in line with the normal process. For all RGH, Read Nand, Create ECC*, Write ECC, get CPU key, Create Image and Write Image. Create ECC* will now transfer your KV into the premade ECC, so people wont lose it (who does that anyway) and so we won't have people asking why they can't see their DVD key in XELL Added Console type on CPU Key database. If you double click on a row the CPU Key will be loaded and if you press the ... button to load a nand, you should be automatically taken to the serial folder it belongs in (if you still have the nands in their respective serial folders) Scan Folders should auto populate info on previous entries More Bug fixes and Improvements Build 289 Added R-JTAG checkbox Added Corona 3+ selection in CR3 Pro Rater (fake post) Fixed Minor Bug Build 288 Added DGX to RGX Conversion XSVF's Added TX released ECC files For use to obtain CPUKeys on dashes greater than 14719 Removed Write DGX Options (now writes correct ECC dependant upon nand loaded/selected) Added Menu option to write new ECC files if you havent loaded a nand Added Ability for LTP and Nand-x to write x128 XSVFs Added Protection check whilst using JR Programmer (in case you stupidly try to write a XSVF to CR3Pro) Moved Trinity XSVF radio button into RGH2 group Fixed bug creating image without nanddump.bin Fixed bug on Custom XeBuild Commands Build 287 Added CR3 Pro Rater Fixed some bugs Build 286 Added support for LTU required files on "Extract files" function for use with JungleFlasher Build 285 Added BGA on Corona v4 size as acceptable Added Write DGX button when nand requiring DGX is loaded Added Alternate DGX for Corona Added Corona_en files for demon Added Xell Freeboot for Corona with Full HDMI support Fixed Bug in write nand, removed need for delay setting writing to nand with JRP Improved Sonus360 Custom editor Functionality Fixed settings save error Fixed inability to select Full Dump on BB consoles Fixed SMC config bug More bugs fixed Altered available Dashes for direct download through J-Runner (Now limited - Dont go downloading more dash versions than you need! - Conserve the Bandwidth) You're now limited to number of dashes/time frame Build 284 Added DGX support Added Sonus Custom Sounds Added SMC Config Editor Added Erase for Corona 4GB (F2 for an alternative erase method) Added Custom XeBuild Command Rewrote Functions for nand-x/JR-P Changed way it saves settings Added support for new ISD chip Patch kv OSIG list updated Patch kv Serial and Console ID added Added rev option on Advanced XeBuild Options Lots of various enchancements, bug fixes, optimizations Build 283 Added Improved Scan IP (if nand loaded in source) Added Hex Editor/Viewer Added Xecuter Sonus Editor Added Ability to use custom CB when creating Nand (advanced function) Improved nand initialization Improved Bad block Handling Fixed bug on delete from CPUKey Database Build 282 Allows full dump of Corona 4GB to work with Xebuild Build 281 Added Xebuild 1.05 Added read/write to Corona 4GB using SD Card reader Full Corona 4GB support Build 280 Added Corona Install Images Added DIY Corona xsvf for 48MHZ Osc Added Monitor COM wiring Images Added Enable/Disable of File Checks/Downloads in Settings Added app re-opens in same screen position as was last used Changed Use of registry for settings (values are stored elsewhere) Changed Settings layout Changed Custom Functions layout Changed Xsvf selection screen Fixed Nand init after dash selection Fixed Cpukeydb clipboard after a sort-by selection Fixed RGH auto Selection for Trinity Fixed Small bug in dashlaunch selection radio buttons Fixed Bug where crash occurs if filepath no longer exists for working folder Tidied up Images dropdown menus Added warning of existing files in output folder on start Added fcrt when extracting files Fixed bug in Scan for keys Build 279 Added support for Xebuild 1.04 Added support Corona ECC Added COM port Monitor for Xell (additional wiring and HW required - you can use a CK3i or NAND-X USB Update Cable) Added Demon Hotkeys F5 - toggle Demon Nand/Xbox360 Nand F6 - Power On Xbox360 F7 - Power Off Xbox360 Added Scan Ip Range for CPU Key (range scanned is in settings page - default is LAN) Added ability to change output name of images built (settings page - default: updflash.bin) Build 278 added support for dashlaunch 3.02 added support for xebuild 1.03 Build 277 Added Team Xecuter DemoN support Read DemoN/Xbox360 nand Write DemoN/Xbox360 nand Erase DemoN/Xbox360 nand Write XSVF to CoolRunner Toggle Between Nands Power Console On/Off (Kiosk Pin wiring required) Update DemoN Firmware Improvements to POST monitor Improved nand initialization and ECC creation (faster) Build 276 Added POST Monitor Added routine to Write TX fusion nands (handles bad blocks) Added Menus items, moved around to make more sense Added option in settings for some users who were reporting JR-Programmer write 'lagging' (it should be similar to read speed) Added ability to update / re-program the FW on JR-Programmer Added Scan for keys/nands function in Key database Added device connected notification images :) Added CR Rev C pictures Build 275 SMC config viewer Extract files function now extracts all the required files for Fusion into output folder Advertisement now opens in the user's specified browser and not Internet Explorer \o/ :P Added another warning message when users are about to dump nand thus replacing an existing file A checksum.md5 is now generated on compare, dunno why its needed but someone asked for it Enhanced bad block handling, now not only it remaps blocks to create ecc but it writes them in the correct position as well Lots of optimizations Build 274 added an additional xsvf file for falcons - rgh2 Build 273 fixed a bug when internet connection is active but server is down Build 272 fixed a bug with rgh2 and dashlaunch Build 271 added support for xebuild 1.02 added support for dashlaunch 3.00 fixed a few bugs Build 270 fixed a typo on ecc creation for 6752 Build 269 fixed incompatibility error on XP Build 268 Layout change added RGH2 support for 14717 > phats added RGH2 Wiring images added RGH2 xsvf files added ARM 2 support added Xecuter J-R Programmer support added LPT support (for coolrunner programming only) added Xebuild options editing screen added sounds on Success and Failure conditions (editable) added Xell-Reloaded on JTAG - for HDMI support during CPU key retrieval etc added bad blocks tab for full check of bad blocks added .dll usage added support for updating jtags of any wiring (creating aud_clamp, Open_tray updated images etc) added new icon added reporting console LDV in log during CpuKey grab over network removed Xellous use on JTAG improved update method improved advanced nand/CR functions in improved changelog retrieval some minor bug fixes Build 267 added an option to use a different bootloader on xenons as there have been reports it improves the glitch times Build 266 added Xenon Support Build 265 a file path fix Build 264 added support for ecc creation on trinity with dash version 14717 and above Build 263 added auto file save for those who are doing purely dvd key retrieval! a couple of tiny tweaks new dashlaunch option - fakelive Build 262 added KV info extraction Build 261 small bug with launch.ini where some values were set to true more idiot proof. removed the pop up at start of reading Build 260 added status updates on xebuild and dashlaunch added support to add dashes offline Build 259 fixed the actual issue on nands that need donor files Build 258 added 14719 (and dash selector) fixed a dashlaunch issue fixed (a possible issue) on nands that need donor files Build 257 fixed a problem with changing ldv Build 256 Initial Release[/php]
J-Runner Core Pack:
To Team XeBuild for the awesome program
To Tiros and Gligli for their build.py script
An important person to me that without him i wouldn't have made this app.
Martin_C, Redline99, Bliep4Ever and everyone that helped me create it with their invaluable info
and last but not least, the testers for .. testing